Home > News > Industry News

What conditions must be met for the normal use of iron tower Angle steel production line?

2022-08-23

During the process of tower Angle steel production, have very strict request for everything, because must guarantee the quality of Angle reaches standards to normal put into use, and only in this way can guarantee the quality of the whole construction and personnel security issues and so on, so the tower Angle steel production line related requirements must be met in advance before. Specifically, this mainly includes the following aspects.
First, to conform to environmental conditions
In the production of convenient iron tower Angle steel, neither direct sunlight nor too wet, so must be in the shade and keep dry ventilation away from damp airflow. In addition, if there is any vibration, the quality of the tower Angle steel production will be affected, so we must do a good job of earthquake prevention measures, such as seismic trenches near the source. Only in this way can the steel tower Angle steel products produced be more refined and better meet the requirements of accuracy. Sometimes, only in this way can there be no bad contact.
Two, to meet the power requirements
In order to minimize the impact of the external environment on the production of the tower Angle steel production line, a stable voltage on the lampblack must be installed in the production position. Because the temperature of the environment in the processing workshop will have relatively large fluctuations, and if the heat emanates out, so the voltage must meet the requirements, in order to not affect the quality of production.
Three, to meet the temperature conditions

Angle in the production of Eiffel Tower temperature must be controlled within the scope of the regulations, in order to better control this must be within the relevant equipment has a fan or cooling fan, help cooling cooling electronic components in a timely manner, especially for the CPU to the requirement of temperature is extremely high, so you have to do a good job in this respect. Reputable tower Angle steel manufacturers emphasize that high temperature and too much humidity will damage components and easily cause faults, so we must avoid these situations and do a good job of cleaning to avoid dust piles