- English
- Español
- Português
- русский
- Français
- 日本語
- Deutsch
- tiếng Việt
- Italiano
- Nederlands
- ภาษาไทย
- Polski
- 한국어
- Svenska
- magyar
- Malay
- বাংলা ভাষার
- Dansk
- Suomi
- हिन्दी
- Pilipino
- Türkçe
- Gaeilge
- العربية
- Indonesia
- Norsk
- تمل
- český
- ελληνικά
- український
- Javanese
- فارسی
- தமிழ்
- తెలుగు
- नेपाली
- Burmese
- български
- ລາວ
- Latine
- Қазақша
- Euskal
- Azərbaycan
- Slovenský jazyk
- Македонски
- Lietuvos
- Eesti Keel
- Română
- Slovenski
- मराठी
- Srpski језик
What are the necessary factors to consider in the tower manufacturing installation of the roof decoration tower
2022-12-30
In addition to complying with the requirements of relevant laws and regulations, the installation of decorative towers on the roof must also consider whether the installation is allowed. So what factors should be considered when installing a decorative tower on the roof?
The tower manufacturing company simply installed the decorative tower on the roof, taking into account the following factors:
The first is the foundation core load capacity:
When installing a decorative tower on the roof, the ability of the base to withstand loads should be considered.
The second is the allowable load capacity of the base:
Mounting the decorative tower on the ceiling will ensure that the requirements for base stability and base deformation do not exceed allowable values and the load that the equipment can bear.
Then is the basic value of the bearing capacity of the base:
The installation of decorative towers on the ceiling will be tested according to standard methods and mathematical statistics will not be used to process the data. Carrying capacity can be obtained by examining the physical properties of the soil.
Then is the standard value of the base load capacity:
Normally, tower fabrication in decorative tower installation on the roof may have a small carrying capacity, it is based on standard methods and mathematical statistics obtained through testing data. This can be determined directly from field identification results and hammer numbers in dynamic sounding tests by examining standard load capacity tables or multiplying base values of load capacity by regression correction coefficients.
Finally, the design value of the bearing capacity of the base:
The mounting base of the decorative tower on the roof can support the bearing capacity of the base of the building while ensuring stability. It can be obtained directly from the plastic load, by dividing the final load by the factor of safety, or the base can be determined by standard values of the support capacity of the base after correction for width and depth.
The tower manufacturing company simply installed the decorative tower on the roof, taking into account the following factors:
The first is the foundation core load capacity:
When installing a decorative tower on the roof, the ability of the base to withstand loads should be considered.
The second is the allowable load capacity of the base:
Mounting the decorative tower on the ceiling will ensure that the requirements for base stability and base deformation do not exceed allowable values and the load that the equipment can bear.
Then is the basic value of the bearing capacity of the base:
The installation of decorative towers on the ceiling will be tested according to standard methods and mathematical statistics will not be used to process the data. Carrying capacity can be obtained by examining the physical properties of the soil.
Then is the standard value of the base load capacity:
Normally, tower fabrication in decorative tower installation on the roof may have a small carrying capacity, it is based on standard methods and mathematical statistics obtained through testing data. This can be determined directly from field identification results and hammer numbers in dynamic sounding tests by examining standard load capacity tables or multiplying base values of load capacity by regression correction coefficients.
Finally, the design value of the bearing capacity of the base:
The mounting base of the decorative tower on the roof can support the bearing capacity of the base of the building while ensuring stability. It can be obtained directly from the plastic load, by dividing the final load by the factor of safety, or the base can be determined by standard values of the support capacity of the base after correction for width and depth.
The above is the analysis of the factors that should be taken into consideration when installing the decorative tower on the roof.
Previous:Power tower manufacturers remind
